CABRESTANTES ELÉCTRICOS TORNILLO
Descripción
RE Series of worm gear winches has set the standard for rugged reliability for the consumer self-recovery and light industrial applications. The Ramsey RE series of winches share many of the same components from our industrial rated line of worm gear winches making the RE the best choice for those who need a rugged and dependable winch for tough off-road applications, Self-recovery and light industrial use. |
Especificaciones
34-9-234-9-3
SUMMARY
RE Series of worm gear winches has set the standard for rugged reliability for the consumer self-recovery and light industrial applications. The Ramsey RE series of winches share many of the same components from our industrial rated line of worm gear winches making the RE the best choice for those who need a rugged and dependable winch for tough off-road applications, Self-recovery and light industrial use.
FEATURES
- Strong worm gear - provides load reversing protection
- Motor and solenoids grounded directly to battery
- Exclusive semi-automatic RAM-LOK ™ clutch disengages for free spooling
- Weather resistant solenoid assembly
- 3.65 M Remote Pendent
- 6ft. 2 gauge battery cable with connectors
- 4 way roller fairlead
- En 14492-1 Compliant
- Made in the USA
APPLICATIONS
- General Industrial
- Off-Road
- Specialty Vehicle
- Towing & Recovery
- Trailer
ESPECIFICACIONES
Tirón línea nominal se basa en la primera capa de cable. Velocidad nominal línea se basa en la primera capa de cable sin carga .
Rated Line Pull | 7,840 Lbs / 3,556 Kg / 35 Kn |
Gear Reduction | 360 |
Weight w/o Cable | 130 Lbs / 59 Kg |
Overall Dimensions (L x W x H) | 22.02 x 11.17 x 10.97 In / 560 x 284 x 277 MM |
Brake | Yes |
Cable | None |
Drum Size (L x F x B) | 8.25 x 7.25 x 3.5 In / 209 x 184 x 89 MM |
Cable Capacity | 70.0 Ft / 21.0 M |
Recommended Cable Size | In / 10.0 MM |
1st Layer Line Speed | 15 Ft/Min / 4.5 M/Min |
Motor Output | 2.5 HP |
Motor Type | Series Wound |
Voltage | 24V |
Fairlead | Roller |
Clutch Type | Blocked, RAM-LOK® |
Clutch Control | Manual |
Minimum Breaking Strength | 69.8 |
WARNING
Winches, capstans and hoists are not intended to be used for lifting or moving of persons.
The last 5 wraps of cable must be left on the drum to assist the cable clamp in holding the load.