CABRESTANTES ELÉCTRICOS TORNILLO
Descripción
RE Series of worm gear winches has set the standard for rugged reliability for the consumer self-recovery and light industrial applications. The Ramsey RE series of winches share many of the same components from our industrial rated line of worm gear winches making the RE the best choice for those who need a rugged and dependable winch for tough off-road applications, Self-recovery and light industrial use. |
Especificaciones
re12000rx-2 re12000rx-3 re12000rx-4
SUMMARY
RE Series of worm gear winches has set the standard for rugged reliability for the consumer self-recovery and light industrial applications. The Ramsey RE series of winches share many of the same components from our industrial rated line of worm gear winches making the RE the best choice for those who need a rugged and dependable winch for tough off-road applications, Self-recovery and light industrial use.
FEATURES
- Strong worm gear - provides load reversing protection
- Motor and solenoids grounded directly to battery
- Exclusive semi-automatic RAM-LOK TM clutch disengages for free spooling
- Weather resistant solenoid assembly
- 12ft. Pendent
- 6ft. 2 gauge battery cable with connectors
- 4 way roller fairlead
- Made in the USA
APPLICATIONS
- General Industrial
- Off-Road
- Specialty Vehicle
- Trailer
SPECIFICATIONS
Rated line pull is based on the first layer of cable. Rated line speed is based on the first layer of cable with No Load.
Rated Line Pull | 12,000 Lbs / 5,440 Kg |
Gear Reduction | 470 |
Weight w/o Cable | 135 Lbs / 61 Kg |
Overall Dimensions (L x W x H) | 24.33 x 11.17 x 10.97 In / 618 x 284 x 277 MM |
Brake | Yes |
Cable | None |
Drum Size (L x F x B) | 10.31 x 7.25 x 3.5 In / 262 x 184 x 89 MM |
Cable Capacity | 125.0 Ft / 38.0 M |
Recommended Cable Size | 3/8 In / 9.0 MM |
1st Layer Line Speed | 16 Ft/Min / 4.9 M/Min |
Motor Output | 2.5 HP |
Motor Type | Series Wound |
Voltage | 24V |
Fairlead | Roller |
Clutch Type | Blocked, RAM-LOK® |
Clutch Control | Manual |
WARNING
Winches, capstans and hoists are not intended to be used for lifting or moving of persons.
CAUTION
The last 5 wraps of cable must be left on the drum to assist the cable clamp in holding the load.