pm15k-2 
pm15k-3
Ramsey Winch Planetary Hydraulic Winches deliver fast, powerful winching pull after pull. With working capacities of 8,000 lbs. (3,640 kgs) to 130,000 lbs. (58,967 kgs) designed for the demands of the towing and recovery, utility, oil & gas, and mining & construction applications, Ramsey has the industrial hydraulic winch you need. Fast line speeds limit time in the danger zone as well as increase efficiency and productivity on the job. Cables can be under-wound to minimize strain on the winch, or overwound reducing risk of damage to the load. Many models can be either foot or side mounted for adaptability and ease of maintenance.
Ramsey Winch Hydraulic Planetary Winches are tested and certified to operate in temperatures from -40° F to 120° F. Our winches offer easy, fast free spooling with only 50 lbs. resistance at -35ºF and can be operated by air or manually, providing fast line payout and reducing wear on components. Ramsey Winch Hydraulic Planetary Winches are manufactured to meet SAE J706 standards for US models and to meet EN14492-1 standards for EU models.
Additional benefits include:
Single lubricant for all-temperature operation to -35ºF
Compact design reduces cable catch between drum flange and end support housing
Lighter weight than comparable models while still offering legendary Ramsey durability and rugged construction
Level winders and cable tensioners are available for many models. Call factory to determine availability of accessories for any specific winch.
2-speed motor available on some models
FEATURES
Easy to install: foot mount and mid mount
Less weight
High efficiency multi-stage planetary winch
Internal spring applied hydraulic release brake
Low profile, compact design
Large drum flanges, holds 220 ft. cable
Optional air shift
APPLICATIONS
General Industrial
Mining & Construction
Railroad
Towing & Recovery
Towing & Recovery (Heavy Wrecker)
Towing & Recovery (Medium Wrecker)
Trailer
Utility
SPECIFICATIONS
Rated line pull and line speed is based on the first layer of cable.
-
Rated Line Pull 15,000 Lbs / 6,800 Kg Gear Reduction 21:1 Weight w/o Cable 337 Lbs / 153 Kg Overall Dimensions (L x W x H) 27.11 x 13.24 x 14.88 In / 688.6 x 336.3 x 378.0 MM Brake Yes Cable None Drum Size (L x F x B) 10.99 x 13.25 x 6.75 In / 279.1 x 336.6 x 171.5 MM Cable Capacity 220.0 Ft / 67.0 M Recommended Cable Size 9/16 In / 14.0 MM 1st Layer Line Speed 53 Ft/Min / 16.2 M/Min Hydraulic Pressure Required for Rated Line Pull 2,250 PSI Hydraulic Flow Required for Rated Line Speed 30 GPM Motor 12 Cu. In. Additional Motor Options None Clutch Type Sliding Spline Clutch Control Air, Manual -
WARNING
Winches, capstans and hoists are not intended to be used for lifting or moving of persons.CAUTION
The last 5 wraps of cable must be left on the drum to assist the cable clamp in holding the load.